Fix Elevation key-in command changes the elevations of laser points inside given polygons. Each laser point inside one polygon is fixed to the same elevation value. The polygons used for this action can be defined by a fence, selection or a specific CAD file level.
The command manipulates the points inside polygons immediately, no manual action is required.
Syntax:
Possible parameters:
PARAMETER |
EFFECT |
|---|---|
class=n |
Classes to modify. Use class=999 or class=all to modify all points. Separate several classes by a comma or minus, for example class=1,3-5. |
polygon=n |
Type of polygons: fence, selected, or level. |
percentile=n |
If given, elevation values are computed from the points inside the polygon and n specifies the percentile (0=minimum, 50=median, 100=maximum) of points. |
elevation=n |
If given, elevation values of all points are set to the fixed value, for example elevation= 0.0. |
level=n |
CAD file level to search for polygons. If given, it forces polygon=level. |
color=n |
If given, filters polygons by color in addition to level. Uses CAD file color numbers. |
weight=n |
If given, filters polygons by line weight in addition to level. Uses CAD file line weight numbers. |
style=n |
If given, filters polygons by line style in addition to level. Uses CAD file line style numbers. |
Corresponding tool: Fix elevation
