Delete Wall Lines
Delete Wall Lines key-in command removes CAD elements drawn on wall line level.
Syntax:
Corresponding tool: Delete Wall Lines
Development < Command >
Development key-in commands activate experimental features. These actions may be under development or included for test purposes. These actions may change, be removed or included as officially released tools as the software updates are installed.
Syntax example:
Draw Horizontal Section
Draw horizontal section key-in command activates the Draw Horizontal Section tool. It does not take any parameters to adjust tool settings.
Syntax:
Corresponding tool: Draw Horizontal Section
Draw Vertical Section
Draw vertical section key-in command activates the Draw Vertical Section tool.
Syntax:
Possible parameters:
PARAMETER |
EFFECT |
|---|---|
depth=n |
Display depth of a section on both sides of the center line. For example depth=0.5. |
view=n |
View number in which to display the defined section. View numbers can range from 1-8, for example view=3. |
Corresponding tool: Draw Vertical Section
