Cut Edge Corner
Cut Edge Corner tool can modify a patch corner in two ways. It cuts off a piece from a corner or it adds a piece to a corner. In any case, the new edges are aligned perpendicular to the edges the form the original corner.
To add/cut off a piece to/from an edge corner:
1. Select Cut Edge Corner tool.
2. Move the mouse pointer inside a view.
The edge corner closest to the mouse pointer is dynamically highlighted.
3. Define the edge corner to modify with a data click.
This updates the Detail view and displays the image that sees the selected corner location best. If you move the mouse pointer, the new edge of the corner is dynamically displayed.
4. Define the location of one edge segment with a data click.
5. Define the location of the other edge segment with a data click.
This places the new corner at the defined location. You can continue with step 3. You can go back from steps 5 to 4 and 4 to 3 by placing a reset click.
