Cut turnarounds
Cut turnarounds command splits a trajectory into several trajectories that do not overlap themselves anymore. It does not remove any parts of the original trajectory. The following figure illustrates the method:
Original trajectory |
Resulting trajectories |
Split condition |
The method does not require point cloud information since the logic uses the line shape and turn angles of trajectories. A trajectory is cut if the minimum length of a trajectory part is at least 5 times longer than the shortest distance between two neighboring trajectory lines. This split condition is illustrated in the third figure above.
To cut trajectories at turnarounds:
1. (Optional) Select the trajectory file(s) you want to cut in the Trajectories window.
2. Select Cut turnarounds command from the Tools pulldown menu.
This opens the Cut Turnarounds dialog:
3. Define settings and click OK.
This splits trajectories whenever there is a close to 180 degree turn. The application deletes the old trajectory file(s) and creates new files in the active trajectory directory.
SETTING |
EFFECT |
---|---|
Apply to |
Trajectories effected by the process: All trajectories or Selected only. |
First number |
Number of the first additional trajectory that is created by the process. |